Formula One Trap Dip

After years of testing and trial runs, we are proud to say we
have formulated the best ever in trap dip. It's easy to use, 
odor free and is unlike anything you've ever used. This 
formula is water-based and adheres easily to all types of
metal. Clean (degrease) all traps and snares thoroughly 
before treating. Traps must be slightly rusted and snares 
should be boiled clean in baking soda before dipping in 
Formula One.

Mix 2 or 3 quarts of well water to one quart of Formula One 
for best results. Dip Traps or unwound snares into solution 
and shake off excess. (Traps, dip & air should be at least 
50 degrees for best results) Let dry completely, then dip 
again for a second and final coat. Traps and snares may
be used as soon as Formula One has cured. 
No air-out time is needed.

Formula One dries to the touch in two hours and can be 
used on the trapline in 24 hours. It's that easy! Stronger
than a dye, more durable than paint, Formula One doesn't 
wear or fade and it gives a hard finish.

Black

Brown

White